Vorträge und Veröffentlichungen

Auf dieser Seite finden Sie eine Auswahl der Vorträge und Veröffentlichungen von CFX Berlin-Mitarbeitern; sollten Sie weitere Informationen hierzu benötigen, kontaktieren Sie uns bitte.

  • CFD-Simulation von rotierenden Vakuumverdrängerpumpen
    Dr. Andreas Spille
    CADFEM Conference 2024
    10.-11. April 2024, Darmstadt
    10. April 2024, Session 2.1: Produkte beherrschen und optimieren durch Simulation, 15:00-15:30 Uhr
  • CFD Simulation of Rotating Vacuum Pumps: Potentials and Challenge
    Dr. Andreas Spille
    ISimT-24 Symposium on Innovative Simulations in Turbomachinery
    23.-24. April 2024, München
  • CFD-Simulation von rotierenden Vakuumverdrängerpumpen: Möglichkeiten und Herausforderungen
    Dr. Andreas Spille
    NAFEMS DACH Konferenz
    10.-12. Juni 2024, Bamberg
    12. Juni 2024, Session 7-C CFD 5, 9:25 Uhr
  • CFD simulation of rotary positive displacement vacuum pumps: Possibilities and Challenges
    Jan Hesse, Dr. Andreas Spille
    International Conference on Screw Machines (ICSM 2024)
    3.-5. September 2024, Dortmund

2023

 

 

2022

 

  • Fluid-Struktur-Interaktion bei Schraubenverdichtern zur Bestimmung der Spaltmaße im Betriebszustand
    Dr. Andreas Spille, Jan Hesse, Rainer Andres, Ludwig Könnecke
    NRC 22 NAFEMS Regional Conference
    4.-6. Oktober 2022, Bamberg
  • Investigation of Radial Gap Size Change under Load and the Impact on Performance for a Twin Screw Compressor using Numerical Simulation
    Rainer Andres, Jan Hesse, Dr. Andreas Spille
    11th International Conference on Screw Machines (ICSM 2022)
    7.-8. September 2022, Dortmund

 

2021

 

 

2019

 

  • “CFD for Designers“ of solenoid valves at the automotive supplier Pierburg
    Tim Wanzek (Rheinmetall Automotive AG, Neuss, Germany), Bastian Schoeneberg
    NAFEMS - Konstruktionsnahe CFD – Stand und zukünftige Entwicklungen
    11.-12.11.2019, Wiesbaden
  • International CAE Conference
    28.-29.10.2019, Vicenza, Italien
    • Co-simulation of 3D CFD model for positive displacement compressor and 1D CFD model of connected system
      Dr. Andreas Spille-Kohoff, Jan Hesse, Rainer Andres, Farai Hetze
    • CFD Simulation of a Two-Sided Screw Compressor with FEM Simulation of Pressure Load
      Dr. Andreas Spille-Kohoff, Jan Hesse, Rainer Andres
    • International TwinMesh™ Users’ Summit
      mit verschiedenen Vorträgen von CFX Berlin-Mitarbeitern und TwinMesh-Kunden
  • CFD Simulation of a Two-Sided Screw Compressor with FEM Simulation of Pressure Load
    Dr. Andreas Spille-Kohoff
    37. CADFEM ANSYS Simulation Conference 2019
    16.-17.10.2019, Kassel
  • 9th International Conference on Compressor and Refrigeration (ICCR)
    10.-12. Juli 2019, Xi'an Jiaotong University, China
    • CFD Simulation of a Two-Stage Twin Screw Compressor including Leakage Flows and Comparison with Experimental Data
      Dr. Andreas Spille-Kohoff, Rainer Andres, Jan Hesse, und Donald Low (Sullair, A Hitachi Group Company, Michigan City, United States)
    • CFD Simulation of a Two-Sided Screw Compressor with FEM Simulation of Pressure Load
      Dr. Andreas Spille-Kohoff, Rainer Andres, Jan Hesse
    • Co-simulation of 3D CFD model for positive displacement compressor and 1D CFD model of connected system
      Dr. Andreas Spille-Kohoff, Rainer Andres, Farai Hetze
  • Transient CFD Co-Simulation of a 3D Compressor Model in its 1D System Environment
    Dr. Andreas Spille-Kohoff, Farai Hetze (CFX Berlin), Bennie du Toit (M-Tech Industrial)
    ASME TURBO EXPO
    17.-21. Juni 2019, Phoenix AZ, USA

 

2018

 

 

2017

 

 

2016

 

 

2015

 

 

2014

 

 

2013

 

 

2012

 

  • Optimierung eines Radialventilators mit optiSLang und ANSYS CFD
    Uwe Salecker, Simon Jossberger
    9. Weimarer Optimierungs- und Stochastiktage, 29.-30.11.2012 in Weimar
  • Simulation von Strömungsgeräuschen mit kommerziellen CFD-Lösern
    Dr. Andreas Spille-Kohoff
    5. VDI-Fachtagung "Maschinenakustik 2012", 13.-14.11.2012 in Karlsruhe
  • ANSYS Conference & 30th CADFEM Users' Meeting, Kassel, 24.-26.Oktober 2012:
    • Optimization of turbomachines using OptiSlang and ANSYS CFD
      Uwe Salecker
      25. Oktober 2012, 09:30 - 10:00 Uhr
    • Simulation of a laser cutting process
      Sirko Pamin (Laser Zentrum Hannover e.V.), Jan Hesse
      25. Oktober 2012, 11:00 - 11:30 Uhr
    • Simulation von Tropfenkollisionen und -oszillationen mit ANSYS CFX und ANSYS Fluent
      Konrad Deinzer (Universität Erlangen-Nürnberg), Dr. Andreas Spille-Kohoff
      25. Oktober 2012, 15:00 - 15:30 Uhr
    • The Role of Metal Vapour in Gas Metal Arc Welding
      Dr. Andreas Spille-Kohoff
      25. Oktober 2012, 17:00 - 17:30 Uhr
    • Kompaktseminar "CAD to Mesh Workflow"
      L. Göllnitz, S. Stahn (ANSYS Germany), Jan Smedseng (CFX Berlin)
      26. Oktober 2012, 9:00 - 12:00 Uhr
  • Effizienzsteigerung von Windenergieanlagen unter Verwendung numerischer Strömungssimulation
    Jan Hesse
    WTT-Kooperationsforum "Innovative Technologien für die Energiewende" zum Thema "Wind", 18.10.2012 in Berlin
  • Numerische Strömungssimulation zur sicheren Auslegung von Wasserkraftanlagen
    Uwe Salecker, Jan Hesse
    WTT-Kooperationsforum "Innovative Technologien für die Energiewende" zum Thema "Wasser", 13.9.2012 in Berlin
  • Strömungs- und Beschichtungssimulation bei galvanischen Schichten
    Dr. Andreas Spille-Kohoff
    WTT-Kooperationsforum "Simulationsverfahren in der Oberflächentechnik", Berlin, 15.5.2012
  • Prozessimulation des Lichtbogenschweißens: Plasmaverhalten und Schutzgasabdeckung
    Dr. Andreas Spille-Kohoff
    Workshop "Anwendungsnahe Schweißsimulation 2012", 09.05.2012, Ringhotel Munte am Stadtwald, Bremen
  • Lichtbogensimulation mit ANSYS CFX
    Dr. Andreas Spille-Kohoff
    Dresdner Fügetechnisches Kolloquium 2012, 29.-30. März 2012, TU Dresden
  • Ergebnispräsentation des PT-Grid-Forschungsprojekts
    Dr. Andreas Spille-Kohoff, Benoit Bosc-Bierne
    Ergebniskonferenz, 19.-21. März 2012, Wissenschaftszentrum Bonn
  • Numerische Strömungssimulation für Reinraumsituationen
    Uwe Salecker
    5. CLEANROOM EXPERTS DAY zum Thema "Reinraumgeeignete Maschinen, Geräte, Einrichtungen und Anlagen", 13.-14. März 2012, CLEANROOM EXPERIENCE SHOWROOM in Leipzig
  • Simulation von strömungsinduziertem Lärm mit ANSYS CFX
    Dr. Andreas Spille-Kohoff
    Kurzlehrgang "Strömungsinduzierter Lärm", 5.-7. März 2012,Universität Erlangen

 

2011

 

  • Gekoppelte Simulationen für Energieversorgungssysteme
    U. Salecker (CFX Berlin Software GmbH); M. Ljubijankic, C. Nytsch-Geusen, J. Rädler (Universität der Künste Berlin); M. Löffler (TLK-Thermo GmbH)
    NAFEMS-Seminar "Die Rolle von CAE in der Systemsimulation", 8. - 9. November 2011, Wiesbaden
  • ANSYS Conference & 29th CADFEM Users' Meeting, Stuttgart, 19.-21.Oktober 2011:
    • Innovative Turbomachines for CO2-Free Power Plants
      Uwe Salecker, Bastian Schoeneberg (CFX Berlin), Dr. Thomas Polklas, Uwe Rockstroh (MAN Turbo AG)
    • Predicting coat thicknesses in Electroplating with ANSYS CFX
      Dr. Andreas Spille-Kohoff
    • On the Flow Field Analysis of a Synthetic Jet from a Round Orifice
      Christoph Fischer, Dr. Rajnish N. Sharma, Gordon Mallinson (University of Auckland, Neuseeland), Dr. Andreas Spille-Kohoff
    • Modellierung des Strahlungstransports in Schweißlichtbögen mit ANSYS CFX
      Sebastian Jäckel, Martin Hertel (TU Dresden), Dr. Andreas Spille-Kohoff
    • Transitionsmodellierung in ANSYS CFX - Funktionsweise und Relevanz am Beispiel eines Tragflügelprofils
      Michael Fehrs (HAW Hamburg), Dr. Andreas Spille-Kohoff
    • Simulation von Fluid-Struktur-Interaktion: Turek-Benchmark und Dynamik eines Lamellenventils
      Markus Schildhauer (HTWK Leipzig), Dr. Andreas Spille-Kohoff
  • Simulation von strömungsinduziertem Lärm mit kommerziellen CFD-Lösern
    Dr. A. Spille-Kohoff, 6. Tagung Aeroakustik vom Haus der Technik, Braunschweig, 28. und 29.Juni 2011
  • Simulationsgestützte Entwicklung von innovativen Turbomaschinen für CO2-freie Kraftwerke
    B. Schoeneberg, U. Salecker, Dr. T. Polklas, U. Rockstroh (MAN Diesel & Turbo SE), Veranstaltungsreihe "Neue Trends und Entwicklungen für eine energie- und ressourceneffiziente Produktion", Berlin, 10.Mai 2011
  • Tertiäre Stromdichteverteilung mit Berücksichtigung von Wasserstoff, Strömung und lokaler Verarmung
    Dr. A. Spille-Kohoff, Anwendungsprofile von und durch AnSim: Galvanik neu gestalten, Berlin, 23./24.März 2011
  • Numerische Simulation von Metall-Schutzgas-Schweißen unter Berücksichtigung des Metalldampfes
    Dr. A. Spille-Kohoff, Dr. M. Schnick, M. Hertel (TU Dresden), DPG-Frühjahrstagung der Fachverbände Plasmaphysik und Kurzzeitphysik, 28.-31.März 2011, Kiel
  • Simulation von Schweißprozessen mit kommerziellen CFD-Lösern in Grid-Umgebungen
    Dr. A. Spille-Kohoff, Symposium Plasmatechnologie-Grid auf der DPG-Frühjahrstagung der Fachverbände Plasmaphysik und Kurzzeitphysik, 28.-31.März 2011, Kiel

 

2010

 

  • Process Simulation of Arc Welding: From Fundamental Physics to Commercial CFD
    Dr. A. Spille-Kohoff auf 1st Sino-German Workshop "Simulation of Welding" an der Bundesanstalt für Materialforschung und -prüfung, Berlin, 25.10.-29.10.2010
  • ANSYS Conference & 28th CADFEM Users' Meeting, Aachen, 03.-05.November 2010:
    • Innovative Turbomachines for CO2-Free Power Plants
      U. Salecker, B. Schoeneberg, Dr. T. Polklas (MAN Turbo AG), U. Rockstroh (MAN Turbo AG)
    • Simulation of a heat-recovery steam generator with ANSYS CFX
      U. Salecker
    • Simulation of heat transfer in a deLavaud facility with ANSYS CFX
      B. Bosc-Bierne
    • Simulation of the flow inside a facility for sewage sludge drying
      J. Hesse
    • Numerical Simulation of Multicomponent Diffusion with ANSYS CFX
      E. Preuß (TU Berlin), Dr. A. Spille-Kohoff
  • Simulation von Strömungsverhältnissen und tertiärer Stromdichteverteilung an Gestellware
    Dr. A. Spille-Kohoff auf den Oberflächentagen 2010, Berlin, September 2010
  • Modelling of gas-metal arc welding considering metal vapour and shielding gas mixture
    Dr. M. Schnick (TU Dresden), Prof. U. Füssel (TU Dresden), M. Hertel (TU Dresden), S. Rose (TU Dresden), Dr. A. Spille-Kohoff, Dr. A. B. Murphy (CSIRO), Gas Discharges 2010, Greifswald, September 2010
  • Optimierung der Hydrodynamik in galvanischen Bädern
    Dr. A. Spille-Kohoff beim 32. Ulmer Gespräch, Ulm, April 2010
  • Simulation of Electrolyte Flow and Deposition Rate in Electrogalvanising with CFD Software
    Dr. A. Spille-Kohoff auf Nanocoatings 2010, Dresden, März 2010

 

2009

 

  • Nutzung von Grid-Ressourcen mittels Virtualisierung
    Dr. A. Spille-Kohoff auf dem OptiNum-Workshop "Numerische Simulationen im D-Grid", Göttingen, November 2009
  • ANSYS Conference & 27th CADFEM Users' Meeting, Leipzig, November 2009:
    • Electric Arc Simulation with Electro-Magnetics beta-Feature of ANSYS CFX
      Dr. A. Spille-Kohoff
    • Simulation of a Wafer-Chuck configuration with ANSYS CFX
      U. Salecker, G. Franz (CTR AG)
    • Simulation of Multi-Physics in Electrogalvanising with ANSYS CFX
      Dr. A. Spille-Kohoff
    • Simulation der turbulenten vorgemischten Verbrennung eines Drallbrenners mit ANSYS CFX
      O. Krüger (TU Berlin), Dr. A. Spille-Kohoff
    • Simulation of Low Voltage Arc Chutes with ANSYS CFX
      M. Lohse (TU Dresden), Dr. A. Spille-Kohoff
    • Numerische Simulation der kavitierenden Strömung in Diesel-Einspritzsystemen
      M. Voß (Beuth Hochschule Berlin), Prof. Dr. P. Bartsch (Beuth Hochschule Berlin), Dr. A. Spille-Kohoff, D. Viertler (Hydraulik-Ring GmbH)
    • Simulation of a Radial Piston Pump with ANSYS CFX
      B. Bosc-Bierne
  • Simulation und Optimierung der Elektrolytströmung in der Galvanotechnik
    Dr. A. Spille-Kohoff auf dem WTT-Kooperationsforum "Funktionelle Oberflächen" an der Bundesanstalt für Materialforschung und -prüfung, Berlin, Oktober 2009
  • Simulation und Optimierung der Elektrolytströmung in der Galvanotechnik
    Dr. A. Spille-Kohoff auf den ZVO-Oberflächentagen, Bremen, September 2009
  • Arc Welding: From Process Simulation to Structural Mechanics
    Dr. A. Spille-Kohoff auf der European Automotive Simulation Conference, München, Juli 2009
  • Strömungssimulation in der Antriebstechnik: Möglichkeiten und Potentiale
    U. Salecker auf dem FVA Kongress zur Simulation im Produktentstehungsprozess, Veitshöchheim, Juni 2009
  • Simulation von Magneto-Hydrodynamik: Wechselwirkung zwischen Strömung und Elektromagnetik an den Beispielen "Elektromagnetisches Rühren" und Hartmann-Strömung
    Dr. A. Spille-Kohoff auf dem 10. Kinetikseminar & 6. Workshop Angewandte Simulation in der Kristallzüchtung am Griebnitzsee bei Berlin, April 2009
  • Lichtbogenprozessimulation mit ANSYS CFX
    Dr. A. Spille-Kohoff auf dem Dresdner Fügetechnisches Kolloquium 2009, Dresden, März 2009
  • Numerische Simulation von Gleitringdichtungen
    U. Salecker, Dr. A. Laxander (EagleBurgmann) auf dem NAFEMS Seminar: Simulation of Complex Flows (CFD) - Applications and Trends, Wiesbaden, März 2009
  • Aktuelle Entwicklungen in der numerischen Strömungssimulation (CFD)
    Dr. A. Spille-Kohoff auf dem Zentrum für die Simulation komplexer Systeme, Beuth Hochschule für Technik Berlin, Februar 2009

 

2008

 

  • ANSYS Conference & 26th CADFEM Users’ Meeting, Darmstadt, Oktober 2008:
    • Simulation of Electroplating with ANSYS CFX
      Dr. A. Spille-Kohoff
    • Optimised Flow in the Jewish Museum Berlin
      Dr. A. Steinmann
    • Flow Conditions in a Packed Bed
      J. Hesse
    • CFD Simulation of a Vertical Axis Wind Turbine of Darrieus Type
      M. Siewert, Prof. Dr. P. Bartsch (Beuth Hochschule Berlin), Dr. A. Spille-Kohoff
    • Numerical Calculation of Erosion in Ring Mills
      U. Salecker, Dr. A. Steinmann
    • Numerical Calculation of Mechanical Seals
      U. Salecker, Dr. A. Laxander (EagleBurgmann)
  • Tutorial: CFD-Simulation von strömungsinduziertem Lärm
    Dr. A. Spille-Kohoff auf dem NAFEMS-CFD-Seminar: Simulation komplexer Strömungsvorgänge - Anwendungen und Trends, Wiesbaden, März 2008

2019 - 2022

 

 

2015 - 2018

 

  • Heat Transfer Systems for Novel Nuclear Power Plant Designs
    S. Vlach, C. Fischer (CFX Berlin Software GmbH), H. van Antwerpen (M-Tech Industrial Ltd)
    atw International Journal for Nuclear Power Vol. 63 (2018), Issue 4, pp 217-220
  • 3D CFD simulation of electrochemical machining based on dissolving characteristics within the SIREKA joint research project
    Dr. A. Spille-Kohoff (CFX Berlin Software GmbH), R. Schulze (SITEC Industrietechnologie GmbH), G. Meichsner (Fraunhofer Institut für Werkzeugmaschinen und Umformtechnik IWU), Dr. M. Hackert-Oschätzchen (TU Chemnitz), S. Busan (alphacam GmbH)
    Proceedings INSECT 2016 - 12th International Symposium on Electrochemical Machining Technology
    Prof. J. Deconinck (Editor), University press Belgium, ISBN 978-9461-97-461-7
  • Optimized design of electrochemical machining processes by a combination of 3D simulation and rapid prototyping of cathodes
    Dr. A. Spille-Kohoff (CFX Berlin Software GmbH), R. Schulze (SITEC Industrietechnologie GmbH), G. Meichsner (Fraunhofer Institut für Werkzeugmaschinen und Umformtechnik IWU), Dr. M. Hackert-Oschätzchen (TU Chemnitz), S. Busan (alphacam GmbH)
    Proceedings INSECT 2015 - 11th International Symposium on Electrochemical Machining Technology
    A. Hassel, C. Grill (eds.), Shaker Verlag 2016, ISBN 978-3-8440-4728-8
  • CFD simulation of cavitation in an internal gear pump
    Dr. A. Spille-Kohoff, Jan Hesse (CFX Berlin)
    Proceedings of 3rd International Rotating Equipment Conference, Pump Users International Forum 2016
    VDMA Verlag 2016, ISBN 978-3-8163-0697-9
  • CFD simulation of a screw compressor including leakage flows and rotor heating
    Jan Hesse, Dr. A. Spille-Kohoff (CFX Berlin)
    Proceedings of 3rd International Rotating Equipment Conference, Compressor Users International Forum 2016
    VDMA Verlag 2016, ISBN 978-3-8163-0698-6

 

2011 - 2014

 

  • Structured meshes and reliable CFD simulations: TwinMesh for positive displacement machines
    Jan Hesse, Dr. Andreas Spille-Kohoff (CFX Berlin Software GmbH)
    Dr. Jan Hauser, Philipp Schulze-Beckinghausen (GHH RAND Schraubenkompressoren GmbH)
    VDI-Berichte 2228 "International VDI Conference Screw Machines 2014" (2014), S. 297-308
  • Simulation der Hydrodynamik bei galvanotechnischen Produktionsprozessen
    Dr. Andreas Spille-Kohoff
    Galvanotechnik 1/2014, Eugen G. Leuze Verlag
  • Numerical simulation of droplet detachment in pulsed gas–metal arc welding including the influence of metal vapour
    M. Hertel (TU Dresden), A. Spille-Kohoff (CFX Berlin), U. Füssel (TU Dresden), M. Schnick (TU Dresden)
    Journal of Physics D: Applied Physics 46 (2013)
  • Numerical solution of multi-component species transport in gases at any total number of components  DOI-Link
    Andreas Spille-Kohoff (CFX Berlin), Enrico Preuß (TU Berlin), Klaus Böttcher (Leibniz-Institut für Kristallzüchtung)
    International Journal of Heat and Mass Transfer, Volume 55, Issues 19–20, September 2012, Pages 5373–5377
  • Visualization and Optimization of Shielding Gas Flows in Arc Welding
    M. Schnick, M. Dreher, J. Zschetzsche, U. Fuessel (TU Dresden), A. Spille-Kohoff (CFX Berlin)
    Welding in the World Vol. 56 Number 1-2, 2012
  • Numerical investigations of arc behaviour in gas metal arc welding using ANSYS CFX
    M. Schnick, U. Fuessel, M. Hertel (TU DResden), A. Spille-Kohoff (CFX Berlin), A. Murphy (CSIRO)
    Frontiers of Materials Science 2011
  • Numerical investigations of the influence of metal vapour in GMA welding
    M. Schnick, U. Füssel, M. Hertel, S. Rose, M. Häßler (TU Dresden), A. Spille-Kohoff (CFX Berlin), A. B. Murphy (CSIRO)
    Welding in the World Vol. 55 Number 11-12, 2011

 

2008 - 2010

 

  • Optimierung der Hydrodynamik in galvanischen Bädern
    Andreas Spille-Kohoff
    in: Grüne Galvanotechnik - Stand und Perspektiven; Berichtsband über das 32. Ulmer Gespräch
    Eugen G. Leuze Verlag, 2010, ISBN 978-3-87480-261-1
  • Modelling of gas-metal arc welding taking into account metal vapour
    Dr. M. Schnick (TU Dresden), Prof. U. Füssel (TU Dresden), M. Hertel, M. Hässler, Dr. A. Spille-Kohoff, Dr. A.B. Murphy (CSIRO) im Journal of Physics D: Applied Physics, Cluster issue on metal vapour in atmospheric-pressure arcs, Number 43, 3. November 2010
  • Numerische Simulation der Bypassströmung im Abhitzedampferzeuger einer Gasturbine
    J. Hesse im NAFEMS Magazin 2/2010
  • Numerical investigations of the influence of design parameters, gas composition and electric current in plasma arc welding (PAW)
    Dr. M. Schnick, Prof. U. Füssel, Dr. A. Spille-Kohoff in Welding in the World, Volume 54 (2010) Issue 3-4
  • Metal Vapour Causes a Central Minimum in Arc Temperature in Gas Metal Arc Welding through Increased Radiative Emission
    Dr. M. Schnick (TU Dresden), Prof. U. Füssel (TU Dresden), and M. Hertel (TU Dresden), Dr. A. Spille-Kohoff, Dr. A. B. Murphy (CSIRO) im Journal of Physics D: Applied Physics ( Artikel: J. Phys. D: Appl. Phys. 43 (2010))
  • Numerical Simulation of Thermal Interaction between Human Being and its Environment with Computational Fluid Dynamics
    I. Maus (Fraunhofer IZM), Dr. A. Spille-Kohoff im Micromaterials and Nanomaterials Nr. 9, 2009, S. 202-205.
  • Numerische Simulation von Gleitringdichtungen
    U. Salecker und Dr. A. Laxander (EagleBurgmann) im NAFEMS Magazin, 11.2009
  • Auf Goldkurs
    N. Warzecha (Institut für Forschung und Entwicklung von Sportgeräten), Dr. A. Spille-Kohoff CAD-CAM REPORT Nr. 7, 2008, S. 42-43
  • Breathing Easily. Simulation of airflow in human noses can become a useful rhinosurgery planning tool.
    Dr. A. Steinmann, Prof. Dr. P. Bartsch, Dr. S. Zachow (Konrad-Zuse-Zentrum für Informationstechnik Berlin), T. Hildebrandt (Asklepios Klinik Birkenwerder) in ANSYS Advantage Volume II, Issue 1, 2008

 

2005 - 2007

 

  • Dünne Bleche müssen sich fügen
    Dr. A. Spille-Kohoff in Produktionsforschung - 57 erfolgreiche Projekte für Menschen und Märkte, Bundesministerium für Bildung und Forschung, Bonn 2007, S. 64-65
  • Aesthetic and function in rhinoplasty
    Prof. Dr. med. W. Heppt (Städtisches Klinikum Karlsruhe), T. Hildebrandt (Asklepios Klinik Birkenwerder), Dr. A. Steinmann, Dr. S. Zachow (Konrad-Zuse-Zentrum für Informationstechnik Berlin) im Springer Journal: Eur Arch Otorhinolaryngol, Vol. 264 (Suppl 1), RL 126, S. 307, 2007
  • Going for Gold. Simulation helps design low-drag canoes for Olympic-medal performance
    N. Warzecha, Dr. A. Spille-Kohoff in ANSYS Advantage, Volume I, Issue 3, 2007
  • Innovation in der Funktionell-Ästhetischen Nasenchirurgie: Rhino-CFD
    T. Hildebrandt (Asklepios Klinik Birkenwerder), Dr. S. Zachow (Konrad-Zuse-Zentrum für Informationstechnik Berlin), Dr. A. Steinmann, Prof. Dr. med. W. Heppt (Städtisches Klinikum Karlsruhe) in Face, Int. Mag. of Orofacial Esthetics, Oemus Journale Leipzig, pp. 20-23, 2, 2007
  • Understanding nasal airflow via CFD simulation and visualization
    Dr. S. Zachow (Konrad-Zuse-Zentrum für Informationstechnik Berlin), Dr. A. Steinmann, T. Hildebrandt (Asklepios Klinik Birkenwerder), Prof. Dr. med. W. Heppt (Städtisches Klinikum Karlsruhe) in Proc. Computer Aided Surgery around the Head, pp. 173-176, 2007
  • Prozesssimulation Lichtbogen- und Plasmalöten
    Dr. M. Schnick (TU Dresden), Prof. U. Füssel (TU Dresden), J. Zschetzsche, J. E. Fuentes Munios, A. Spille-Kohoff in DVS-Berichte, Band 243, DVS-Verlag Düsseldorf 2007, ISBN 978-3-87155-799-6
  • Simulation der Mensch-Raumklima-Wechselwirkung mit dem Tanabe-Modell
    Prof. Dr. P. Bartsch, Dr. A. Spille-Kohoff in KI Luft- und Kältetechnik, 9/2006, S. 359-364
  • Engineers are seeking more speed for Olympic rowers
    N. Warzecha, Dr. A. Spille-Kohoff in Mechanical Engineering, September 2006
  • CFD Simulation of nasal airflow: Towards treatment planning for functional rhinosurgery
    Dr. S. Zachow (Konrad-Zuse-Zentrum für Informationstechnik Berlin), Dr. A. Steinmann, T. Hildebrandt (Asklepios Klinik Birkenwerder), Prof. Dr. med. R. Weber (Städtisches Klinikum Karlsruhe), Prof. Dr. med. W. Heppt (Städtisches Klinikum Karlsruhe) in Int. J. of Computer Assisted Radiology and Surgery, Springer, S. 165-167, 2006
  • Simulation von gekoppelten strömungsmechanischen und elektromagnetischen Effekten am Beispiel der Prozesssimulation des Lichtbogenschweißens
    Dr. A. Spille-Kohoff, Prof. Dr. P. Bartsch im NAFEMS Magazin 2/2006 S. 50-57
  • Process Simulation of Arc Welding
    Dr. A. Spille-Kohoff in ANSYS Solutions Vol. 7, Issue 1, 2006, S. 27-29
  • Simulation der Mensch-Raumklima-Wechselwirkung mit dem Tanabe-Modell in ANSYS CFX
    Prof. Dr. P. Bartsch, Dr. A. Spille-Kohoff in VDI-Berichte 1921, 2006, S. 201-209
  • Prozessoptimierende Regelung für das ChopArc-Schweißen im Ultraleichtbau
    E. Metzke, M. Langula, S. Goecke, Dr. A. Spille-Kohoff in DVS-Berichte Band 237, 2005
  • ChopArc: MSG-Lichtbogenschweißen für den Ultraleichtbau
    S.-F. Goecke, E. Metzke, A. Spille-Kohoff, M. Langula in Fraunhofer IRB Verlag 2005, ISBN 3-8167-6766-4